Autowatch Ghost Immobiliser

Autowatch Ghost Immobiliser

How to Update the Bluetooth Firmware on an Autowatch Ghost Immobiliser

Updating the Ghost Bluetooth Firmware If your Autowatch Ghost Immobiliser requires a Bluetooth firmware update, this can be completed using the official Ghost Bluetooth Update app, available for both Apple and Android devices. Download the App Choose the correct version for your device:       Putting the Ghost into...
Read More

How to Pair a Key Fob with an Autowatch Ghost Immobiliser

How to Pair a Key Fob with an Autowatch Ghost Immobiliser If you've purchased a replacement key fob or need to reconnect an existing one, this guide explains how to pair a key fob with your Autowatch Ghost Immobiliser. The process varies slightly depending on whether you have a Ghost-II,...
Read More

Autowatch Ghost Bluetooth Reset & Pairing Guide

Ghost-II / Ghost Pro If your Ghost-II or Ghost Pro needs to have its Bluetooth memory reset before pairing a new device, follow the procedure below exactly. We recommend completing this process as best pracitce if you are experiencing pairing issues. Switch the vehicle ignition on, but do not start...
Read More

Problems with the Autowatch Ghost Immobiliser 1 App

Problems with the Autowatch Ghost Immobiliser App? If you're having problems with the Autowatch Ghost Immobiliser app, don't worry—we're here to help. Please note: The information on this page applies to the original Autowatch Ghost Immobiliser, which was discontinued around September 2018 and supported Bluetooth smartphone pairing. The newer Autowatch...
Read More

Autowatch Ghost – How to Enter the Emergency PIN

Entering the Emergency PIN Please watch the video for a full run through. The video shows the entering of the serial number for demonstration purposes only. Your unique emergency override PIN can be found on the back of the black card that you WERE given on completion of the installation. Please do not call...
Read More

Vehicle Starting Issues, Warning Lights and Engine Stalling

If after attempting to start your vehicle you are experiencing engine stall, warning lights/notifications or none starting then please refer to the below. Warning Lights Displayed While Driving This issue can be cause by: Not waiting for the double flash after entering your code - Common on Ford Transit, Golf...
Read More

Engine Stalled & Will Not Restart

This article is particularly useful for Jaguar, Land Rover. Range Rover, Mercedes and BMW vehicles to restart the engine after a failed start. Engine stalled when you selected gear and now it will not restart? If you have selected drive gear without entering the code, the engine has stalled and...
Read More

Service Buttons

Your service button WILL have been told to you on completion of the installation and is often noted on the second page of the user manual. Service buttons can vary from make and model but SOME of the common ones are listed below:   Audi , Volkswagen , Skoda, Porsche...
Read More

Problems Entering PIN Code

Jaguar / Land Rover Vehicles If you have started the vehicle and tried to select gear without entering the pin code then the vehicle will have stalled. Engine restart is now not possible. If this has happened the Ghost is now set to Start Inhibit. To start the vehicle, proceed...
Read More

Enter or Exit Service Mode

There's a description on how to do this in the instruction booklet with the black card that you WERE given on completion of the installation. Remember - If the vehicle exceeds 30mph for 15 minutes it will automatically exit valet mode. This is more than fine for airport parking and...
Read More

Changing the PIN

Changing the PIN is explained on the back of the black card that you were left after installation. If you do not have this, you can download a copy below. PIN Change Procedure Turn ignition on (do not start the engine). Enter code. Double flash of indication lamp (or audible...
Read More