Updating the Ghost Bluetooth Firmware
If your Autowatch Ghost Immobiliser requires a Bluetooth firmware update, this can be completed using the official Ghost Bluetooth Update app, available for both Apple and Android devices.
Download the App
Choose the correct version for your device:
Putting the Ghost into Bluetooth Update Mode
Follow the instructions below for your Ghost model before opening the Bluetooth Update app.
Ghost-II / Ghost Pro
- Switch the vehicle ignition on, but do not start the engine.
- Enter your normal disarm code.
- Press and hold the accelerator pedal fully to the floor.
- Enter your disarm code again. The Ghost will enter Learn Mode, confirmed by a flash every three seconds.
- Release the accelerator pedal.
- Press the service button 20 times.
Ghost-III
- Switch the vehicle ignition on, but do not start the engine.
- Enter your normal disarm code.
- Press and hold the accelerator pedal fully to the floor.
- Enter your disarm code again. The Ghost will enter Learn Mode, indicated by a flash every three seconds.
- Release the accelerator pedal and wait for several confirmation flashes.
- Press the accelerator fully to the floor and release it three times, then wait for the three-flash confirmation.
- Press the accelerator fully to the floor and release it three times again, then wait for the three-flash confirmation.
- Press the accelerator fully to the floor and release it once, then wait for the single-flash confirmation.
Completing the Firmware Update
Once the Ghost Immobiliser has successfully entered Bluetooth Update Mode, open the Ghost BT Update app on your smartphone or tablet.
Select the appropriate firmware update file for your Ghost model and follow the on-screen instructions to complete the update.



