Ghost-II / Ghost Pro
If your Ghost-II or Ghost Pro needs to have its Bluetooth memory reset before pairing a new device, follow the procedure below exactly. We recommend completing this process as best pracitce if you are experiencing pairing issues.
- Switch the vehicle ignition on, but do not start the engine.
- Enter your normal disarm code.
- Press and hold the accelerator pedal fully to the floor.
- Enter your disarm code a second time. The Ghost will enter Learn Mode, indicated by a flash every 3 seconds.
- Release the accelerator pedal.
- Enter your disarm code and wait for three flashes.
- Enter your disarm code again and wait for two flashes.
- Within 10 seconds, press the service button 10 times, then wait for two flashes.
Once these steps have been completed successfully, the Ghost-II or Ghost Pro will have its Bluetooth pairing memory fully cleared. You can then attempt to pair your Bluetooth device again.

